Windows 10/8.1/8/7 Black Screen Solution Guide.

What is Windows 10/8.1/8/7 Black Screen or Black Screen of Death on Windows 10/8.1/8/7 OS?

When you push the “Power” button, a plain black screen that appears upon login — at which point the system seizes up and remove everything except, in some cases, an additional My Computer window. That’s Black Screen of Death.

Well, maybe it’s not as bad as it sounds, but it’s still not so good. Well, it is different for Blue Screen of Death which represents some deep serious problem in hardware or drivers Black Screen is relatively easy to fix chill a bit.

Table of Contents

Fix Windows 10/8.1/8/7 Black Screen

There are 3 solutions to fix black screen error for Windows 10/8.1/8/7/Vista/XP.

Solution 1. For laptop users:

Well, this is very simple one so kind of it is suggested to try out first. So here we go.

First unplug your laptop from its charging/power source and detach the battery.

Wait for some while about few minutes and then attach the battery and then restart your computer.

Hopefully, it will work.

Basically, it re-run some of the circuit and other hardware.

Also read: Fix “DNS_PROBE_FINISHED_BAD_CONFIG” in 7 Ways

Solution 2. For both laptop and desktop users:

This method is for a little bit tech-savvy persons, so think before you proceed.

Some reason for this Windows 10/8.1/8/7 Black Screen is the GPU problem mainly for AMD GPU users.

When you are at the Windows Black Screen, press and hold the power button until the system powers off i.e. force shut down.

With the system off, press and hold the Shift and the F8 key and press and release the power button (don’t leave the Shift and the F8 key).

The system will boot and will show to brand logo i.e. Samsung or etc. At this time release the Shift and F8 keys.

This will lead to the Recovery Screen. If again blank screen appears, repeat the above procedure many times.

Read: DNS_PROBE_FINISHED_NO_INTERNET: Error Fix

From the Recovery Screen, click on See advanced repair options.

Click Troubleshoot -> Advanced options -> Startup Settings -> Restart.

The System will Restart now, Make sure you select Safe Mode.

Open device manager, to do that type “devmgmt.msc” in the search bar.

Click Display adapters to expand its categories.

Right-click on the AMD Radeon HD device or the graphics drivers you have and uninstall it.

Restart the System, the system will boot normally to windows.

More tricks: Convert Fat32 to NTFS without Losing Data

Your System should work properly.

So this was the Windows 10/8.1/8/7 Black Screen fix. If this work, kindly share it with your friends and leave a comment too 😀